通風管道安裝時需要注意的事項！

發布人：http://m.hwzxw.net   發布時間：2018-11-27 10:49:59

通風管道我們應該并不生疏，可以很好的確?？諝饬鲿常档陀泻舛?，鐵質通風管道設備主要是有風管出產設備廠家出產完成的，一般來說用于電子廠房的通風，酒店賓館，還有食物無菌車間等需要進行空氣跟新的地方的空調體系。

Ventilation pipes should not be sparse, which can ensure the smooth air flow and reduce harmful concentration. Iron ventilation pipes are mainly manufactured by wind pipe manufacturers. Generally speaking, they are used in ventilation of electronic factories, hotels, and food aseptic workshops, which need air to keep pace with new places. Central air-conditioning system.

關于通風管道體系的裝置有很多的要求，下面就來簡單的說一說吧。

There are many requirements for the installation of ventilation duct system. Let's talk about it briefly.

在裝置的時分要關于風管的方位，高度，走向都要進行設計好，在風管的直徑上面要求可以確保關于空氣的更新的速度。

Firstly, the orientation, height and direction of the air duct should be well designed when installing the device. The speed of air renewal can be ensured by the requirement of the diameter of the air duct.

關于風管的銜接部分，要進行緊密銜接，中心所選用的墊片的厚度應該不小于3mm,墊片不該凸入管內，亦不宜突出法蘭外。關于金屬性的風管在轉彎的時分要遵從嚴厲的裝置要求。關于塑料軟管在彎道時要注意不該該有死彎或許陷落。

As for the connecting part of the air duct, the thickness of the gasket selected by the center should not be less than 3mm, and the gasket should not protrude into the pipe or out of the flange. The metal duct should comply with strict device requirements when turning. As for the plastic hose in the bend, we should pay attention to whether there should be dead bend or collapse.

風管裝置前，應內、外雜物，并做好清潔和保護作業。一起關于風管的銜接部分的螺絲的方位要盡可能的便利今后的維修。

Before air duct installation, internal and external debris should be removed, and cleaning and protection work should be done well. Together, the orientation of the screw on the connecting part of the air duct should be as convenient as possible for future maintenance.

在裝置的時分要關于風管的方位，高度，走向都要進行設計好，在風管的直徑上面要求可以確保關于空氣的更新的速度。

Firstly, the orientation, height and direction of the air duct should be well designed when installing the device. The speed of air renewal can be ensured by the requirement of the diameter of the air duct.

關于風管的銜接部分，要進行緊密銜接，中心所選用的墊片的厚度應該不小于3mm,墊片不該凸入管內，亦不宜突出法蘭外。關于金屬性的風管在轉彎的時分要遵從嚴厲的裝置要求。關于塑料軟管在彎道時要注意不該該有死彎或許陷落。

As for the connecting part of the air duct, the thickness of the gasket selected by the center should not be less than 3mm, and the gasket should not protrude into the pipe or out of the flange. The metal duct should comply with strict device requirements when turning. As for the plastic hose in the bend, we should pay attention to whether there should be dead bend or collapse.

風管裝置前，應內、外雜物，并做好清潔和保護作業。一起關于風管的銜接部分的螺絲的方位要盡可能的便利今后的維修。

Before air duct installation, internal and external debris should be removed, and cleaning and protection work should be done well. Together, the orientation of the screw on the connecting part of the air duct should be as convenient as possible for future maintenance.