新聞
螺旋風管的優勢性是什么樣的你知道嗎?
發布人:http://m.hwzxw.net 發布時間:2019-02-26 09:56:10
螺旋風管的設備明顯地減少了管與管之間的聯接點,使管件結合部的透露減少到較低水平,典型的螺旋風管長度是三到六米,而典型的矩形風管的長度只需一到一點五米;且聯接兩個螺旋風管只需一個管接件,而傳統的矩形風管的聯接則常常必要一個完好自力的雙法蘭系統。
The equipment of spiral duct obviously reduces the connection point between pipe and pipe, and reduces the disclosure of joint parts to the lowest level. The typical length of spiral duct is 3-6 meters, while the typical length of rectangular duct is only 1-1.5 meters; and the connection of two spiral ducts only needs one pipe joint, while the traditional connection of rectangular duct often needs a perfect self-supporting double. Flange system.
1、標準化產品。
1. Standardized products.
螺旋圓風管的配件(管件和評論)的分娩已高度自動化、系統化,并具有工業化的質量節制。
The delivery of fittings (fittings and comments) of spiral circular air duct has been highly automated and systematic, and has industrialized quality control.
2、設備費用低。
2. Low equipment cost.
圓形風管系統的設備歲月只需相類似的矩形管道的三分之一。
Circular duct systems require only a third of the equipment years of similar rectangular ducts.
3、素日只需較小的設備空間。
3. Small equipment space is needed in vegetable days.
在不增加任何壓降的情況下,相同的設備空間內直徑為二百毫米的圓形管道可替代二百五到一百五毫米的矩形管道。在不增加額定設備空間的前提下,數條平行的圓形管道可替代扁平矩形管道。
Without any additional pressure drop, a circular pipe with a diameter of 200 mm in the same equipment space can replace a rectangular pipe with a diameter of 25 to 15 mm. Without increasing the rated equipment space, several parallel circular pipes can replace flat rectangular pipes.
酌量了所有的身分,在絕大多數情況下,圓形管道所占用的空間都要少于矩形管道。對反常的壓力特征,數條圓形管道的設備空間常常與一條矩形管道的的設備空間相同或更少。許多矩形管道系統設備時必要四螺栓系統,因而在管道的各個偏向增加四十到八十毫米。
Considering all identities, in most cases, circular pipes occupy less space than rectangular pipes. For abnormal pressure characteristics, the equipment space of several circular pipes is often the same or less as that of a rectangular pipe. Many rectangular piping systems require a four-bolt system for equipment, thus increasing the deviation of the piping by 40 to 80 mm.
4.平安密封圈防漏系統。
4. Safety sealing ring leak-proof system.
5.壓低落:眾所周知,圓形風管的風阻比矩形風管的風阻要小得多。
5. Depression: It is well known that the wind resistance of a circular duct is much smaller than that of a rectangular duct.
6.相同截面積時,長寬比為一比三的矩形風管周長比螺旋風管的周長百分之四十,用材??;同理而言,由于螺旋風管周對錯,保溫用材也可呼應減少。
6. With the same cross-section area, the circumference of rectangular duct with the ratio of length to width of one to three is 40% longer than that of spiral duct, which saves material consumption. Similarly, because of the right and wrong circumference of spiral duct, the insulation material can also be reduced.
7.精巧的螺旋壓抑楞筋工藝使螺旋風管具有蒙受壓力的較好強度,增加螺旋型楞筋后,咬口潛縫厚度是管體的四倍,管道的剛性反常大,顯示出結實的優越性,能蒙受較大的壓力負荷而無損變形,用材厚度可減小百分之十五,低落本錢。
7. Exquisite spiral restraining rib technology makes the spiral air duct have the best strength under pressure. After increasing the spiral rib, the thickness of the undercut in the bite is four times that of the tube body, and the rigidity of the pipe is abnormal, showing strong superiority. It can withstand the greatest pressure load without damaging the deformation. The thickness of the material can be reduced by 15% and the cost can be reduced.
以上信息是我們濟南通風管道整理發布希望對大家有所幫助我們的網站是:http://m.hwzxw.net!
The above information is our Jinan ventilation duct arrangement and release hope to help you all on our website is: http://m.hwzxw.net!
上一篇:鍍鋅通風管道給我們帶來什么方便?
下一篇:螺旋風管設計時要注意哪些問題?
相關