安裝山東通風管道的前提條件是什么？

發布人：http://m.hwzxw.net   發布時間：2020-12-25 17:10:37

如果大家細心的話，可以發現在一些工廠的外墻上有許多的長方體管道，從外觀來看，是用鐵皮制作而成的，那么大家知道這個管道的作用是什么嗎?其實它們是用來通風的，因?yàn)楣S里的生產工作經常會釋放出一些氣體，有的是無害氣體，但有的是有害氣體，因此為了保證工廠內的工人們的身體，需要將這些氣體排出室外。要想這個通風管道發揮好通風的效果，在安裝的時候一定要安裝好，那么大家知道安裝山東通風管道的前提條件是什么嗎?相關的安裝規定了解嗎?下面就隨小編來了解一下吧。

If you are careful, you can find that there are many cuboid pipes on the external walls of some factories. From the appearance, they are made of iron sheet. Do you know what the function of these pipes is? In fact, they are used for ventilation, because the production work in factories often releases some gases, some of which are harmless, but some of which are harmful. Therefore, it is necessary to pay attention to them In order to ensure the safety of the workers in the factory, these gases need to be discharged outside. If you want the ventilation pipe to play a good ventilation effect, you must install it well when you install it. Do you know what the preconditions for installing Shandong ventilation pipe are? Do you understand the relevant installation regulations? Let's understand it with the editor.

安裝通風管道的前提條件：

Prerequisites for installation of ventilation ducts:

一、安裝前的準備：

1、 Preparation before installation:

1、各種安裝材料應具有出廠合格證明書或質量鑒定文件及產品清單。

1. All kinds of installation materials shall have factory certificate or quality appraisal document and product list.

2、風管成品不允許有變形、扭曲、開裂、孔洞、法蘭脫落、漏鉚、漏打螺栓孔等缺陷。

2. The finished air duct shall be free of deformation, distortion, cracking, holes, flange falling off, missing riveting, missing bolt holes and other defects.

3、安裝的閥體、風口等部件應檢查調節裝置是否靈活，消聲片、油漆層有無損傷。

3. The valve body, tuyere and other parts installed should be checked to see if the adjusting device is flexible, and whether the muffler and paint layer are damaged.

4、安裝使用的材料：螺栓、螺母、墊圈等輔材應符合產品質量要求。

4. Materials used for installation: bolts, nuts, washers and other auxiliary materials shall meet the product quality requirements.

5、查看現場留洞尺寸、位置和風管尺寸是否符合圖紙要求，避免無效安裝。

5. Check whether the hole size, location and air duct size meet the drawing requirements to avoid invalid installation.

二、安裝前提條件：

2、 Installation prerequisites:

1、建筑物圍護結構施工完成，所有障礙物和雜物已清理，地面雜物均已清理。

1. The construction of building envelope is completed, all obstacles and debris have been cleared, and ground debris have been cleared.

2、凈化系統風管安裝時，建筑物內部安裝部件的地面均已做好，墻面混凝土找平完畢，必須包證室內無塵土或有防塵措施的條件下進行。

2. When the air duct of the purification system is installed, the floor of the internal installation parts of the building has been made, and the wall concrete leveling has been completed. It must be carried out under the condition that there is no dust or dust-proof measures in the room.

3、安裝地點輔材必須齊全，并有施工技術員進行質量和技術的指導。

3. The auxiliary materials at the installation site must be complete, and the construction technician shall provide quality and technical guidance.

以上就是關于安裝山東通風管道的前提條件的介紹，希望對大家有所幫助，如想了解更多資訊內容請點擊我們的網站：http://m.hwzxw.net。

The above is about the installation of Shandong ventilation duct prerequisite introduction, hope to help you, if you want to know more information content, please click our website: http://m.hwzxw.net 。