一般通風管道的規劃及運用辦法

發布人：http://m.hwzxw.net   發布時間：2023-06-09 15:20:50

通風管道是專門為一處或幾處房間或設備送風和排風的管道。排煙管道是專門共排煙氣的管道，就用處來講有別離，就管道自身講都是管道。下面濟南風管加工廠為您講解下一般通風管道的規劃及運用辦法。

A ventilation duct is a duct specifically designed to supply and exhaust air to one or several rooms or equipment. Smoke exhaust ducts are specialized ducts for co exhaust of smoke, which differ in terms of purpose. In terms of the ducts themselves, they are all ducts. Below, Jinan Air Pipe Processing Factory will explain to you the planning and application methods of general ventilation ducts.

通風管道是工業與民用修建的通風與空調工程用金屬或非金屬管道，是為了使空氣流轉，下降有害氣體濃度的一種市政根底設備。

Ventilation ducts are metal or non-metallic ducts used in industrial and civil ventilation and air conditioning engineering, which are municipal infrastructure equipment designed to circulate air and reduce harmful gas concentrations.

風管制造與設備所用板材、型材以及其他首要制品資料，通風管道規劃制造時，都應契合規劃及相關產品現行規范的規則，并運用出廠查驗合格證明，資料出場時應按現行有關規范進行查驗。

The materials of plates, profiles, and other primary products used in the manufacturing of air ducts and equipment, as well as the planning and manufacturing of ventilation ducts, should comply with the rules of the current planning and relevant product specifications, and use factory inspection certificates. The materials should be inspected according to the current relevant specifications when leaving the site.

在通風管道設備的時分要關于風管的方位，高度，走向都要進行規劃好，在風管的直徑上面要求能夠確保關于空氣的更新的速度。

When using ventilation duct equipment, it is necessary to plan the orientation, height, and direction of the air duct, and ensure the speed of air renewal in terms of the diameter of the air duct.

關于風管的聯接部分，要進行緊密聯接，所選用的墊片的厚度應該不小于3mm,墊片不該凸入管內,亦不宜杰出法蘭外。關于金屬性的風管在轉彎的時分要遵照嚴厲的設備要求。關于塑料軟管在彎道時要留神不該該有死彎或許塌陷。

The connection part of the air duct should be tightly connected, and the thickness of the gasket used in the center should not be less than 3mm. The gasket should not protrude into the pipe, nor should it protrude outside the flange. Strict equipment requirements should be followed when turning metal ducts. Be careful not to have dead bends or collapses when making plastic hoses in bends.

風管設備前,應內、外雜物,并做好清潔和保護作業。一同關于風管的聯接部分的螺絲的方位要盡或許的便當往后的修理。

Before the air duct equipment, there should be debris inside and outside, and cleaning and protection work should be done well. The orientation of the screws on the connecting part of the air duct should be as convenient as possible for future repairs.

通風管道作業時，會將外界新鮮空氣順暢帶入室內。如在日常日子中或自界說場景發生的條件下,人們通過通風管道然后確保一些有煙霧或環境中一氧化碳通過空氣流轉得到稀,然后不讓人們被有害氣體煩擾。還有什么問題就來我們網站http://m.hwzxw.net咨詢吧！

When working in ventilation ducts, fresh air from the outside will be smoothly brought into the room. In daily life or under the conditions of self defined scenarios, people use ventilation ducts to ensure that some smoke or carbon monoxide in the environment is diluted through air circulation, and then prevent people from being disturbed by harmful gases. If you have any further questions, please come to our website http://m.hwzxw.net Consult!