常見的幾種空調通風管道清洗方法

發布人：http://m.hwzxw.net   發布時間：2023-07-07 09:27:37

1、機器人清洗方法

1. Robot cleaning methods

可使用真空吸塵設備、機器人控制系統、高壓氣體和其他輔助設備將粘附在管道內壁的灰塵，清出管道。

Vacuum cleaning equipment, robot control systems, high-pressure gas, and other auxiliary equipment can be used to remove dust adhering to the inner wall of the pipeline.

2、電動軟軸清洗方法

2. Cleaning method for electric flexible shaft

在小型控制器驅動下，清洗窄小而多彎的支管道，實現自動正反轉，自動拐三道彎以上，清洗長度在18米，其特點是外皮為可自潤滑的塑料或橡膠材料護套，里芯是可長距離傳遞動力扭距的特型金屬軟軸。

Driven by a small controller, it can clean narrow and multi curved branch pipes to achieve automatic forward and reverse rotation, with an automatic turning of more than three turns. The cleaning length is 18 meters, and its characteristic is that the outer skin is a self-lubricating plastic or rubber material sheath, and the inner core is a special metal flexible shaft that can transmit power torque over a long distance.

3、人員清洗方法

3. Personnel cleaning methods

由于風道尺寸比較大，使用清洗設備的效率就不是很高。因此，我們采用做好防護的人員進入風道清洗，采用的設備是真空吸塵器，馬達強勁吸力，吸塵管的長度可達30米，可快速的完成。

Due to the large size of the air duct, the efficiency of using cleaning equipment is not very high. Therefore, we use personnel with proper protection to enter the air duct for cleaning. The equipment used is a vacuum cleaner, with a strong suction motor and a suction pipe length of up to 30 meters, which can be quickly completed.

4、機組清洗方法

4. Unit cleaning method

高壓沖洗機組冷熱換熱器、凝結水盤、過濾網、風機葉輪，用干毛巾把表面擦拭干凈，并把機組內的雜物吸出。

High pressure flushing of the cold and hot heat exchanger, condensate tray, filter screen, and fan impeller of the unit, wipe the surface clean with a dry towel, and suck out any debris inside the unit.

5、部件清洗

5. Component cleaning

應對空調管道的送、回風口拆下清洗。

Remove and clean the supply and return air ports of the air conditioning pipeline.

下面濟南通風管道廠家再來簡單的講講清洗前的準備工作：

Next, the ventilation pipeline manufacturer in Jinan will briefly explain the preparation work before cleaning:

1、針對實際情況制定清洗方案。

1. Develop a cleaning plan based on the actual situation.

2、根據甲方要求，為每位施工人員辦理出入證。

2. According to the requirements of Party A, apply for entry and exit permits for each construction personnel.

3、提前落實存放設備的場所，落實用水用電的位置，聽從甲方安排。

3. Determine the location for storing equipment in advance, determine the location for water and electricity, and follow the arrangements of Party A.

4、再次強調施工、文明施工，增強意識。

4. Emphasize once again safe and civilized construction, and enhance safety awareness.

5、嚴禁在施工現場抽煙、嚴禁抄拿客戶的任何物品、嚴禁赤膊作業。

5. Smoking is strictly prohibited on the construction site, taking any items from customers is strictly prohibited, and bare shirtless operations are strictly prohibited.

對于空調通風管道的清洗方式以及清洗注意事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://m.hwzxw.net咨詢！

That's all for the cleaning methods and precautions of the central air conditioning ventilation ducts. We hope to provide you with good help. For more information, please visit our website http://m.hwzxw.net consulting service