通風管道為焊接車間創造良好環境

發布人：http://m.hwzxw.net   發布時間：2019-05-07 10:56:16

　　人們提及通風風管，通常都是聯想到寫字樓中的通風風管，它是與人們平常觸碰較多的這種運用。我覺得，通風風管的運用還許多，特別是在是在某些廠區廠區中，都必須安裝通風管道。

　　People refer to ventilation ducts, which are usually associated with the ventilation ducts in office buildings. It is a kind of application that people usually touch more. In my opinion, there are still many applications of ventilation ducts, especially in some factories and districts where ventilation ducts must be installed.

　　由于車間焊接車間普遍存在空間大、焊接部位不確定、焊接位置不穩定、焊接方法多等特點，室內氣流紊亂，污染物難以處理。因此，如何經濟有效地解決焊接車間的通風除塵問題，關系到生產人員的身體健康。

　　Because of the large space, uncertain welding position, unstable welding position and many welding methods, the indoor air flow is disordered and the pollutants are difficult to deal with. Therefore, how to solve the problem of ventilation and dust removal in welding workshop economically and effectively is related to the health of the workers.

　　通風風管布置時要充分考慮電焊是這種勞動效率較為大的崗位，且在焊接方法流程時會造成很多的有害合金濃煙、電弧焊接塵、有害物質、輻射熱、環境污染，嚴重影響工作員和附近工作員身心健康，因而務必對焊接車間開展透風通氣，和兌水致癌物質，創建優良的電焊壞境。

　　When arranging ventilation ducts, it is necessary to fully consider that electric welding is a more labor-efficient position, and it will cause a lot of harmful alloy smoke, arc welding dust, harmful substances, radiation heat and environmental pollution, which will seriously affect the physical and mental health of workers and nearby workers. Therefore, it is necessary to carry out ventilation in welding workshop, remove and mix water carcinogenic substances, and create a new welding workshop. Excellent welding environment.

　　通風管道設計一方面使用清潔空氣稀釋室內空氣中的有害濃度，同時將污染空氣連續排出室外，使室內空氣中的有害濃度不超過衛生標準規定的大允許濃度。綜合通風通常是以廠房的通風率或空氣交換率為基礎，根據稀釋理論，將工廠內的有害物質濃度稀釋到允許濃度以下。

　　On the one hand, ventilation duct design uses clean air to dilute the harmful concentration of indoor air, while continuously discharging polluted air outdoors, so that the harmful concentration of indoor air does not exceed the maximum allowable concentration prescribed by health standards. Comprehensive ventilation is usually based on the ventilation rate or air exchange rate of the plant. According to dilution theory, the concentration of harmful substances in the plant is diluted below the allowable concentration.